How do I mount it on a wall?

Yes, your DIY Crew paper cutter can be wall mounted. Please install it horizontally, with the wooden dowel and tear bar level and parallel to the floor. Vertical mounting is not supported.

  1. Choose a solid, suitable mounting surface and position the frame at a comfortable height.
  2. Use a level to check that both sides of the frame are aligned before tightening the screws.
  3. Follow the assembly instructions and use screws and anchors suitable for your wall.

For solid brick, concrete or block walls, use the included plastic wall plugs and M5 × 40 mm screws as described in the instructions. For drywall or plasterboard with a wooden stud behind it, screw into the stud without the plastic wall plugs.

The included plastic plugs are not suitable for unsupported drywall or plasterboard. If there is no stud behind your chosen position, please ask a hardware specialist or installer for anchors rated for your wall type.

If any mounting hardware is missing, email info@diycrew.co with your order ID and cutter size. We will be happy to review a claim within your one-year warranty and help with parts or a replacement unit, depending on your case and availability.

Still need help

Can't find what you're looking for? Reach out and we'll sort it